Filter
Top Products
AT-CV5000 Media Converter Chassis Installation Guide
19
System Description
Hardware
Features
The standard AT-CV5000 Media Converter chassis has the following
features:
18 line card/expansion slots with preinstalled AT-CV5PNLx blank slot
covers
One preinstalled LED interface card which contains:
– One RS-232 port to access any module installed in the
rear expansion slot
– One reset button
– Seven status LEDs
One rear expansion slot
Two preinstalled AT-CVFAN fan modules
Two slots in the back for power supplies. The chassis is shipped
without any power supplies installed and must contain at least one
power supply to be operational. For more information about the power
supplies, refer to “Power Supplies” on page 31.
One ON/OFF switch for each power supply slot
Software
Features
In order to manage the chassis using the AT-S70 management software,
you must install at least one AT-CV5M01 Management Card. Otherwise,
you must manually set the DIP switches on each line card to the settings
appropriate for your network.
For information about the management software, refer to the AT-S70
Management Software User’s Guide.