Filter
Top Products
Chapter 2: Installation
56
connector is connected to the receiver connector on the remote node.
Figure 27. Dual SC Port
To connect a fiber optic cable to a dual SC connector, perform the
following procedure:
1. Remove the dust cover from the fiber optic port, as shown in
Figure 28.
Figure 28. Removing the Dust Cover from a Dual SC Fiber Optic Port
2. Connect the appropriate optical cable to the port, as shown in
Figure 29.
Figure 29. Connecting to the Dual SC Fiber Optic Port
3. Connect the other end of the optical cable to the link partner.
4. Power ON the end nodes.
1
TX RX
Transmitting
Receiving
Fiber
Connector
Fiber
Connector
Warning: Class 1 Laser product.
L1
Warning: Do not stare into the laser beam.
L2
284
T
X
LK
AT FD
T
X
M
M
R
X
285
LK
AT
T
LK
AT FD
T
X
M
M
R
X