Allied Telesis AT-2716POE Network Card User Manual


 
AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide
75
2. Click the Configure button and then the Advanced tab.
3. Set the "VMQ VLAN Filtering" parameter to Disable or Enable.
The default setting is Disable.
Updating the Wake
Up Capabilities
property
The "Wake Up Capabilities" parameter allows the user to set the
adapter to wake up from a low power mode when it receives a network
wake up frame. There are two wake up frames: Magic Packet and IP
frame.
1. In Microsoft Windows, right-click the Network Adapter in
Network Connections and then click Properties.
2. Click the Configure button and then the Advanced tab.
3. Set the "Wake Up Capabilities" parameter to Both, Magic
Packet, None, or Wake Up Frame.
The default setting is Both.
Updating the WOL
Speed property
The "WOL Speed" property allows the user to select the speed at which
the adapter connects to the network during Wake-on-LAN mode.
1. In Microsoft Windows, right-click the Network Adapter in
Network Connections and then click Properties.
2. Click the Configure button and then the Advanced tab.
3. Set the "WOL Speed" parameter to 10 Mb, 100 Mb, or Auto.
The default setting is 100 Mb.