Allied Telesis AT-2716POE Network Card User Manual


 
AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide
78
Checking Port LEDs on the Adapter
The adapter has two LEDs, one LED for each port and indicates network
link and network activity. Before the port LEDs can provide
troubleshooting information, the adapter must be connected to the
network and the network drivers for your particular operating system must
be installed.
1. Verify that the adapter driver software has been installed and that the
adapter is connected to a network.
2. Check to see that the LEDs operate as described in Table 4.
Table 4. Fiber Optic Port LED Status
LED
State
Description
TX/FX
On
Valid network link.
Blinking
Data Traffic is present
Off
No network link.