Allied Telesis AT-2716POE Network Card User Manual


 
AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide
82
Software Problems and Solutions
This section lists problems and solutions for the Microsoft Remote
Installation Service (RIS), Windows Operating Systems, and
miscellaneous issues.
Microsoft Remote
Installation
Service (RIS)
Instructions
Problem: Microsoft Remote Installation Service (RIS) installation fails for
Windows XP.
Solution: Refer to Microsoft Article Q246184, “How to Add Third-Party
OEM Network Adapters to RIS Installations.”
Windows XP Image
To deploy a Windows XP Image, follow the steps in the Microsoft Article
Q246184 at http://support.microsoft.com/default.aspx?scid=kb%3benus%
3b246184.
Windows
Operating
Systems
This section lists known problems and solutions in Windows XP,
Windows Vista, and Windows 7 Operating Systems.
Problem: IP address is configurable on a member of the team.
Solution: When a team is created, the TCP/IP properties for the adapters
are unselected. Then you can select and configure TCP/IP properties of
the adapters and configure an IP address manually.
Problem: When creating 64 VLANs, all virtual adapters show
disconnected or one of the 64 VLANs show disabled.
Solution: The maximum VLAN configurations are 63 tagged and one
untagged VLAN ID 0. If 64 tagged VLANs are created, they are
disconnected. A reboot is required and only 63 tagged VLANs show links,
while a 64th is disabled.
Miscellaneous
The following table lists known miscellaneous problems and solutions:
Problem: When the bus on the system is operating at PCIe mode, the
adapter performs at PCIe mode if it is added by the application.
Solution: When the system is booted up without an adapter, the bus
operates at the lowest mode which is PCI. This problem can be corrected
by rebooting the system.