Filter
Top Products
Chapter 2: Broadcom Advanced Control Suite 2 (BACS 2) Applications
30
Resources Tab This section describes the Resources tab, as shown in Figure 3.
Figure 3. Resources Tab
The Resources tab contains the following fields:
Bus Type. Indicates the PCI bus type (PCI or PCI-X).
Slot No. Indicates the PCI slot number of the installed adapter.
Bus Speed (MHz). Indicates the PCI bus speed (33, 66, 100, or 133
MHz).
Bus Width (bit). Indicates the PCI bus data width of either 32 or 64
bits.
Bus No. Indicates the PCI bus number and the device number for the
device.
Example: [0] 14 indicates that the controller resides in PCI bus 0,
device 14.
Device No. The number assigned to the device by the operating
system.
Function No. The port number of the adapter. For a single-port
adapter, the function number is 0. For a two-port adapter, the function
number for the first port is 0, and the function number for the second
port is 1.
Interrupt Request. The interrupt line number that is associated with
the device. Valid numbers range from 2 to 25.
Memory Address. The memory mapped address that is assigned to
the device. This value can never be 0.