Filter
Top Products
Advanced Control Suite User’s Guide
83
7. The snmpget and snmpgetnext commands can be used to receive the
BASP snmp objects such as:
% snmpget localhost public BASP-Config-MIB::btTeamNumber
% snmpgetnext localhost public BASP-Config-
MIB::btTeamNumber
BASP SNMP objects are provided in the following text files:
– BASP-Config-MIB.txt
– BASP-Statistics-MIB.txt
– Brcm-BSAPTrap-MIB.txt
Installing the
RPM Package
Complete the following steps to install BASP SNMP agent from the RPM
package.
1. To install the RPM package, run:
% rpm -i baspsnmp-{version}.i386.rpm
The BASP script and MIB files are installed. The snmpd.conf
configuration file is modified to add support for the BASP SNMP agent.
2. Follow steps 4 - 6 in the “Installing the TAR Archive” on page 82.
Note
The current RPM installation fails to append the additional directives
needed to the snmpd.conf file to support Basp objects. Therefore,
follow the instruction (3) in the Install - TAR archive to modify the
snmpd.conf file.
SNMP Files See Table 6 for a list of supported SNMP files.
Table 6. SNMP Files
Filename Description
genBaspTrap script monitoring the BASP trap events
getBaspInfo script to process SNMP get/getnext
inquiries
BASP-Config-MIB.txt SNMP MIB file for BASP configuration
objects
BASP-Statistics-
MIB.txt
SNMP MIB file for BASP statistics
objects
Brcm-BSAPTrap-
MIB.txt
SNMP MIB file for BASP trap objects