Filter
Top Products
Advanced Control Suite User’s Guide
77
Note
You can only execute Baspcfg in Super User mode. Attempting to
use baspcfg as a standard user displays the following error
message, "Error in communicating to BASP Module. Is it loaded?".
When you configure Teaming, one Primary Adapter is required.
type Team type: 0=SLB, 1=FEC/
GEC, 2=802.3ad
tname ASCII string of the team
vlan_id VLAN ID: from 1 to 4094,
0=untagged or no VLAN
vname ASCII string of the virtual
device
macaddr MAC address (optional), for
example, 00:10:18:00:11:44
role Role of the physical device:
0=primary, 1=hot-standby
device ASCII string of the physical
device, for example, eth0
Table 4. Parameter Descriptions (Continued)
Parameter Description