Filter
Top Products
Advanced Control Suite User’s Guide
61
1. In BACS2, select the VLAN name in the team’s Virtual Adapters folder,
as shown in Figure 31 on page 60.
2. Right-click the VLAN name and select click Remove VLAN.
3. Click Apply.
4. Click Yes when you see the message indicating that the network
connection will be temporarily interrupted.
Note
When you delete a team, the VLANs configured for that team are
also deleted.
Saving and Restoring a Configuration
The configuration file is a text file that can be viewed with any text editor.
The file contains information about both the adapter and the team
configuration. To save and restore a configuration file, see the following
procedures.
To save a configuration, perform the following procedure.
1. From the File menu, click Team Save As.
The is Save As dialog box is shown in Figure 31.
Figure 32. Save As Dialog Box
2. Type the path and file name of the new configuration file and click
Save (a .bcg extension is added).
To restore a configuration, perform the following procedure.
1. From the File menu, click Team Restore.