Filter
Top Products
3DM 2 Reference
www.3ware.com 59
Maintenance Page
Figure 23. Maintenance Page
The Maintenance page appears when you choose Management >
Maintenance from the menu bar.
The Maintenance page lets you perform maintenance tasks on existing units
on the current controller (shown in the drop-down list on the menu bar), and
lets you create new units by configuring available drives.
Rescan Controller
Use the Rescan Controller button to have 3DM scan the available drives in
the controller and update the list of available drives shown. This is useful in
variety of maintenance tasks. For example, if you physically plug in a drive
and want the controller to recognize the newly plugged in drive.
Note: If you unplug a drive without first removing it through 3DM,
Rescan will not recognize it as gone unless the drive was in use or
until it is required by the system. Always use the Remove link to
remove a drive before unplugging it.