Filter
Top Products
MX28B-1200+27V PRODUCT MANUAL Rev 1
34
Table 6-1. Parameter Locations, Descriptions, and Default Values
PARAMETER DESCRIPTION DISPLAY SCREENS /
DEFAULT SETTINGS
SYSTEM SETUP
Password Entry
PIN Entry
[PIN]
Screen for entry of the active password (PIN).
PIN m+
0000
Password Setup
Level 1 PIN {2}
[SYSTEM/SETUP]
Password (PIN) that permits security Level 1 parameter
changes - limited access.
PIN 1 m+
1111
Level 2 Password {2}
[SYSTEM/SETUP]
Password (PIN) that permits security Level 2 parameter
changes - unlimited access.
PIN 2 m+
2222
OEM Calibration
OEM R Offset {2}
[OEM]
Voltage offset adjustment for factory calibration of voltage
readings/settings.
OEM R Offset m+
0.000 V
OEM R Gain {2}
[OEM]
Voltage gain adjustment for factory calibration of voltage
readings/settings.
OEM R Gain m+
1.000 V
OEM C Offset {2}
[OEM]
Voltage offset adjustment for factory calibration of voltage
readings/settings
OEM C Offset m+
0.000 V
OEM C Gain {2}
[OEM]
Voltage gain adjustment for factory calibration of voltage
readings/settings.
OEM C Gain m+
1.000 V
OEM S Offset {2}
[OEM]
Current offset adjustment for factory calibration of battery
current readings/settings.
OEM S Offset m+
0.0 A
OEM S Gain {2}
[OEM]
Current gain adjustment for factory calibration of battery
current readings/settings.
OEM S Gain m+
1.000 A
Site Address/Identification
Address 1 {1}
[SYSTEM/SETUP]
Power plant address or identification - first line.
Address 1 m+
APC
Address 2 {1}
[SYSTEM/SETUP]
Power plant address or identification - second line.
Address 2 m+
11035 Switzer Av
Address 3 {1}
[SYSTEM/SETUP]
Power plant address or identification - third line.
Address 3 m+
Dallas, TX.
Control Unit Setup & Info.
Model {2}
[SYSTEM/SETUP]
Model name for the DC power plant “reset defaults”
selection will re-initialize to factory settings for model
selected
Model m+
MX28B 1200 24V
Temperature Scale {1}
[SYSTEM/SETUP]
Enables selection of Fahrenheit or Celsius temperature scale
(Fahrenheit “OFF” displays readings in °C).
Fahrenheit m+
OFF
Control Unit Revision
[SYSTEM/SETUP]
Hardware revision level of the control unit.
Cntrl Rev +
000002
Firmware Version
[SYSTEM/SETUP]
Version number of the control unit firmware.
NOTE: Actual firmware version number displayed is the
current version as of the date of manufacture.
FW Version +
000131