Filter
Top Products
Fastmark 600 Series User's Guide 31
Loading Media into the Cutter Option
1. Install media as indicated in the Loading Media Section. Return to these steps when
directed to do so.
2. Push the Media Stock through the slot on the Cutter Module near the platen Roller.
Figure 28 – Inserting Labels in the Cutter Option
13. Close and lock the print head module by pressing firmly until the right and left Print
Head Latches snap shut.
14. Close the Media Access Cover.
15. Press the Feed Button to cut the first label.
Figure 29 – Cutting Labels
Note: Verify that all Cutter Features in the Setup Menu are properly set (Cutter,
BackFeed, and Present Distance) for your application.