Filter
Top Products
Fastmark 600 Series User's Guide 39
Setup Feature and Value List (continued)
Vert Print Align [ -0.50 - +0.50 ] (Inches) Adjust to move printed image up or down
on label. Positive values move image up.
Negative values move image down. After
setting this feature the printer will feed to
the top of the next label.
Horz Print Align [ 0.00 - 1.00 ] (Inches) Adjust to move printed image left or right.
Larger values move the image to the right.
Vert Size Adjust [ -60 - + 60 ] Vertically expands or compresses print
image. Negative values are compressed,
positive values are expanded.
Print Darkness [ -12 - +12 ] Adjust for optimal print darkness. Positive
values are darker.
Print Speed [ 2, 3, 4, 5, 6] (IPS) Adjusts print speed.
Interface Select [ Parallel Only, Serial Only, Auto
Select ]
Selects active interface while ignoring non-
selected interface. Setting to Auto Select
enables both interfaces and performs
automatic port arbitration.
COM1: Baud Rate [ 1200, 2400, 4800, 9600, 14400,
19200, 38400, 57600 ]
Set to match host.
COM1: Parity [ None, Odd, Even ] Set to match host.
COM1: Data Bits [ 7, 8 ] Set to match host.
COM1: Handshake [ RTS, XON/XOFF, RTS & XON,
None ]
Set to match host.
COM1: PAL Xmit [ Enabled, Disabled ] Enables or disables trans-mission of PAL
TM
messages over serial interface.
This does not affect software handshaking
functions.