AMX NXR-ZGW/-ZRP Network Card User Manual


 
NXR-ZGW Browser-based Configuration Manager Pages
19
NXR-ZGW/-ZRP
Personal Area Network (PAN)
Network
The Network page allows you to modify the status of the Personal Area Network.
Enabling and disabling the wireless network
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select Network
under the section Pan.
2. Click the radio button next to Enable to enable the wireless network or select Disable to disable the
network.
3. Click Accept.
Connecting an NXR-ZRP to the network for the first time
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select Network
under the section Pan.
2. In the PAN ID field, enter the default PAN ID for the repeater: 3FFF.
3. Click Accept.
4. Select the Connections tab; the repeater should appear on the router.
5. Click on the EUI-64 link to open the Device Details page.
6. In the PAN ID field, enter the desired PAN ID for the repeater within the network.
7. Click Update Settings.
8. Repeat steps 1-6 for each repeater to be added to the network.
9. Select the Network tab under the section Pan and enter the desired PAN ID in the PAN ID field.
FIG. 10 Network Page
Network Page
Network status Lists whether the network is online or offline.
Wireless Enables or disables the ZigBee wireless networking.
PAN ID The current PAN ID number for the device.
Country/Region Drop down menu; sets ZigBee region (US, Europe, Japan).
Channel Drop down menu; sets the ZigBee operating channel between 11 and 26. The default
channel is 26.