AMX NXR-ZGW/-ZRP Network Card User Manual


 
ii
NXR-ZGW/-ZRP
Table of Contents
Network ........................................................................................................................ 19
Enabling and disabling the wireless network ................................................................ 19
Connecting an NXR-ZRP to the network for the first time ............................................ 19
Setting the PAN channel ............................................................................................... 20
Connecting a Repeater to the Gateway ........................................................................ 20
Connections................................................................................................................... 21
Finding a device’s EUI address...................................................................................... 21
Finding the device’s description.................................................................................... 21
Determining the device type......................................................................................... 21
Finding the amount of time a signal takes from the device to the gateway and back .. 22
Determining the device link quality............................................................................... 22
Checking the device link status ..................................................................................... 22
PAN Device Details ....................................................................................................... 23
Putting a device on the Access List............................................................................... 24
Removing a device from the Access List ....................................................................... 24
Locating the device....................................................................................................... 24
Changing a Connected Device description.................................................................... 24
Changing a device’s ZigBee networking information.................................................... 25
Utilities.................................................................................................................... 26
Device Firmware............................................................................................................ 26
Allowing firmware updates to individual devices.......................................................... 26
Allowing firmware updates to all devices on a network................................................ 26
Connection Log ............................................................................................................. 27
Determining the connection status of a device............................................................. 27
Finding the device’s ICSP number................................................................................. 27
Traffic Log ..................................................................................................................... 28
Finding the device traffic .............................................................................................. 29
Device Configuration ........................................................................................31
Sending Firmware to The NXR-ZGW ...................................................................... 31
Before beginning the Upgrade process ........................................................................ 31
Upgrading The NXR-ZGW via An IP Address.......................................................... 31
Preparing the Master for communication via an IP........................................................ 31
Verifying and Upgrading the device firmware via an IP ................................................ 32
Using the ID Button to Change the NXR-ZGW’s Device Number ........................... 34