AMX NXR-ZGW/-ZRP Network Card User Manual


 
NXR-ZGW Browser-based Configuration Manager Pages
21
NXR-ZGW/-ZRP
Connections
All devices connected to the NXR-ZGW is displayed on this page.
Each device provides the following:
Finding a device’s EUI address
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select
Connections under the section Pan.
2. The EUI address is located in the Connections table under "EUI-64". Click on the EUI address to
open the PAN Device Details page for this device. (See FIG. 12)
Finding the device’s description
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select
Connections under the section Pan.
2. The device’s description is located in the table under "Description".
Determining the device type
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select
Connections under the section Pan.
2. The device type is located in the table under "Type".
FIG. 11 Connections Page
Connections Page
No. The Netlinx ID number.
EUI-64 The 64 bit ZigBee EUI address of the device.
Description The device's description, supplied by the device.
Type The specific type of device being accessed.
Latency A measure of the amount of time (in milliseconds) for a message round-trip from the device to
the gateway and back.
LQI LQ is the link quality of the RF path between the PAN coordinator and the device. Quality
levels are:
not recommended
edge
marginal
good
Status The current status of the device: either "Active" or "Asleep".