Filter
Top Products
30 - E-51028230XT/BG
Logging and time-stamping
Presentation of event
time-stamping by
MGE™ Galaxy™ PW
Time-stamping of events by
MGE™ Galaxy™ PW makes it
possible to:
◗ log the events;
◗ consult the last 500 events that
occurred on the MGE™ Galaxy™ PW
UPS;
◗ consult general statistical data on
UPS operation;
◗ consult measurement records for a
number of physical values concerning
system operation.
The time-stamping information may be
accessed via the MGE™ Galaxy™ PW
keypad and display (standard
equipment). This information may also
be forwarded for the Teleservice
function using the JBUS RS232/485
communications board.
Utilisation via the
MGE™ Galaxy™ PW
display
Main menu
The time and date can be set for the
UPS via the main menu on the display
(see below), using the DATE AND
TIME command. The time-stamping
information, statistics and
measurement records are also
available via the same menu, using the
PAST EVENTS command.
Simply select the desired command
with the ">" sign that can be moved
using the and keys. The
selected command can be confirmed
DATE AND TIME SETUP
>YEAR 1997 MONTH 9
DAY 8 HOURS 8
MINUTES 11 SECONDS 42
and keys to scroll up and down
through the screens.
For time-stamped events, the display
begins with the last event logged.
To access older events, press the
key. If during consultation, you wish to
review more recent events, press the
key.
Setting the date and time
for the UPS
When the DATE AND TIME command
is selected, the screen presented
opposite is displayed:
◗ the current values are automatically
displayed;
◗ you can modify any of the displayed
values;
◗ position the ">" sign opposite the
value to be modified. Then press the
key;
◗ use the and keys to modify
the value;
◗ the key increments the value by
one;
◗ the key decrements the value by
one;
◗ the selected value can be confirmed
by pressing the key. A second
value may then be selected for
modification, again using the
and
keys;
◗ modifications are made and
confirmed value by value;
◗ press the key at any time to exit
the DATE AND TIME function.
by pressing the
key.
General instructions for
using most screens
You can display the desired information
and enter commands using the
,
and keys.
Press the key to exit the time-
stamping consultation mode and return
to the main menu. If no commands are
entered for five minutes, the system
automatically returns to the normal
display mode.
You can scroll through the screens
displaying information. Press the