Filter
Top Products
2
2 Product Description
2.1 The Call-UPS II Panel
The SmartSlot Call-UPS II panel contains the management port and the
status indicator. See the figure below.
Management Port
Status
AP9608 Call-UPS Remote Mgt Device
Smart SlotSmart Slot
The external Call-UPS II rear panel contains the management port, status
indicator,
UPS monitoring port, and optional power jack. See the figure
below.
2.2 Management Port
The Call-UPS II management port is used for configuring Call-UPS II and
for remote management and paging by modem. For specifications, see
Sec. 6.1.
2.3 UPS Monitoring Port [External Version]
The UPS monitoring connector duplicates the signals from the UPS so
that the normal computer-to-
UPS connection is maintained. This port is
for use with
APC software and interface kits only.