Filter
Top Products
11
Key Concepts
continued
Setup overview
To set up the Interface Expander, you will be required to
perform the following procedures as applicable:
1 Determine which SmartSlot accessory slot you
will use for the Interface Expander. See “Multiple
SmartSlot Installation” on page 12.
2 Install the Interface Expander into the SmartSlot
accessory slot of the UPS or other device. See
“Installation” on page 15.
3 Connect the protected devices. See “Connecting to
Protected Devices” on page 17.
4 Configure the Interface Expander for automatic
shutdown. See “Configuring the Interface
Expander” on page 19.
5 Test the operation of the Interface Expander. See
“Testing the Interface Expander” on page 23.