Filter
Top Products
20
Configuring the Interface Expander
continued
Confirmed
shutdown mode
In Confirmed mode, the Interface Expander shuts down the
UPS
after all connected servers have signaled that they have
completed shutdown of the operating system.
Note
: Do not use Confirmed mode if any server connected
to the Interface Expander Basic ports or the UPS
Advanced port is incapable of sending a shutdown
confirmation signal. See “PowerChute plus support
for Confirmed shutdown mode” on this page.
PowerChute
plus
support for
Confirmed
shutdown mode
Some versions of PowerChute plus do not support Con-
firmed shutdown mode when set up for simple signaling.
Other versions require some editing of the
pwrchute.ini
file
in the PowerChute plus installation directory. To find out
whether your version of PowerChute plus supports Con-
firmed shutdown mode, go to http://support.apcc.com/ and
find the link to “What Versions of PowerChute plus Support
Confirmed Shutdown Mode?” under
Preinstallation Infor-
mation|SmartSlot Device|Installation Planning
.
Continued on next page