Filter
Top Products
3
Introduction
continued
Hardware and
software
requirements
The Interface Expander requires:
•An
APC
device equipped with a SmartSlot accessory
slot. SmartSlot devices include—but are not limited
to—the
APC UPS
s in the next item.
•An
APC
UPS
of one the following models:
–Smart-
UPS
®
, except models
AP250, AP400,
AP600, AP900, AP1250, AP2000, SUVS420,
SUVS650, SUVS1000, SUVS1400, SU620
.
–Matrix-
UPS
™
, except models with serial numbers
less than x
9412
.
– Symmetra
™
PowerArray
™
.
•
APC
PowerChute software (simple signaling) or
PowerChute plus (advanced or simple signaling) soft-
ware. See “Simple versus smart signaling: Table 3”
on page 7.
• A serial cable (for each connected device) that moni-
tors shutdown signals. See “Choosing cables: Table
1” on page 4.
Continued on next page