Filter
Top Products
14
Multiple SmartSlot Installation
continued
Installation in
the Symmetra
PowerArray
For installation of multiple SmartSlot devices in the Sym-
metra PowerArray, refer to the numbering shown in the
figure that follows. Note that the PowerNet
SNMP
Adapter
is installed in slot #4, Call-
UPSII
in #3, the Interface
Expander in #2, and Measure-
UPS
II in #1.
If you are using an external SmartSlot housing (Expansion
Chassis or Triple Chassis) in conjunction with a Symmetra
Power Array, install the devices with higher priority in the
external slot(s). Refer to “Installation in the APC Triple
Chassis” on page 13, if applicable.
Daisy chains
If you have increased your SmartSlot capacity by daisy-
chaining Expansion Chassis or Triple Chassis, install the
PowerNet
SNMP
Adapter (or Web/
SNMP
Management
Card) and Call-
UPSII
in the highest-numbered and second-
highest-numbered slots, respectively, of the chassis installed
farthest from the
UPS
.