Filter
Top Products
®
USER’S GUIDE
network management card
33
SNMP
An Access option (the Settings option in the control console) enables (by
default) or disables SNMP. When SNMP is enabled, the Access Control
settings allow you to control how each of the four available SNMP channels
is used.
To define up to four NMSs to serve as trap receivers, see
Trap Receiver settings.
Setting Definition
Community
Name
Defines the password (maximum of 15 characters) which an NMS that is
defined by the NMS IP setting below uses to access the channel.
NMS IP Limits access to the NMS or NMSs specified by the format used for the
IP address.
• 162.245.12.1 allows only the NMS with that IP address to have access.
• 162.245.12.255 allows access for any NMS on the 162.245.12 segment.
• 162.245.255.255 allows access for any NMS on the 162.245 segment.
• 162.255.255.255 allows access for any NMS on the 162 segment.
• 0.0.0.0 or 255.255.255.255 allows access for any NMS.