Filter
Top Products
®
USER’S GUIDE
network management card
68
Event Log
Overview
The DC Power Plant supports an event-logging capability for all DC Power
Plant application firmware modules. This allows you to record and view DC
Power Plant and Management Card events. You can use any of the
following to view the Event Log:
• Web interface
• Control console
• FTP
Logged events
By default, any event which causes an SNMP trap will be logged, except for
SNMP authentication failures. Additionally, the Management Card will log
its abnormal internal system events. However, you can use the Actions
option in the Web interface’s Events menu to disable the logging of events
based on their assigned severity level, as described in Event Actions (Web
Interface only).
To access a list of the System (Management Card) and DC (DC Power
Plant) events, see “Event List” page.
Some System (Management Card) events do not have a severity
level. Even if you disable the Event Log for all severity levels,
events with no severity level will still be logged.