Filter
Top Products
®
USER’S GUIDE
network management card
64
Power Plant Alarms/Internal Log
From Device Manager, type 1 to select DC Power Plant. Then type 7 to
select Power Plant Alarms/Internal Log. The following options are
displayed:
1- Power Plant Status
2- Power Plant Internal Log
Alarm Status. From the Power Plant Alarms/Internal Log sub-menu,
type
1 for Power Plant Status to display the status of all DC Power Plant
alarms.
Interpret an alarm status item as follows:
• For the meaning of each active alarm status item, see the descriptions
of the alarms displayed on the Control Unit menus, as listed in your DC
Power Plant product manual.
• The last character of an alarm item is one of the following:
– The number of the relay that the alarm has activated
– m for a minor alarm
– M for a major alarm
In the following example, item 1 indicates that the System Low Voltage
Alarm is on and is a major alarm, item 3 indicates the System Low
Temperature Alarm is on and is a minor alarm, and item 4 indicates that the
Battery Low Voltage alarm is on and has activated relay 2.
1: Sys LV Alm On M
2: Load LV Alm On M
3: Sys LT Alm On m
4: Batt LV Alm On 2
5: Hdwr Batt T Alm 4