Filter
Top Products
CHAPTER 1: OVERVIEW
1
Overview
This manual provides an overview of operations for the Symmetra
®
LX and Extended Run Cabinet, including detailed
explanations of monitoring, control, and configuration through the PowerView user interface.
Illustrations are representative. Your unit and configuration, including components and optional APC equipment, may
vary from those depicted in this document. Manuals may be accessed through the APC Web site, www.apc.com
.
PowerView
PowerView contains an alphanumeric
display, navigation keys, status indicators,
and an audible alarm.
The tables below describe the status
indicators and navigation keys.
Keys and Indicators
Status Indicator Color Status
LOAD ON Green The UPS is supplying power to the load and is operating in one of the
following modes: On-Line, On-Battery, Command-Bypass, or
Maintenance.
ON BATT Yellow A mains power failure has occurred, and the battery modules are
supplying power to the load equipment.
BYPASS Yellow Power to the load is being supplied directly by the mains power source.
The UPS is removed from the circuit.
FAULT Red The UPS has detected an internal fault condition. An alarm message will
appear on the PowerView display.
Navigation Keys Name Sound Function
Up Short beep Moves the selection arrow upward.
Down Short beep Moves the selection arrow downward.
ESC Escape Short beep Exits the current screen and returns to the previous
screen.
Programming mode only: When pressed until a short
beep (up to one second) occurs, it exits the
programming mode.