Filter
Top Products
Emerge Card Remote Access User Guide Installation •
••
• 11
Connecting to a Multi-user OutLook Switch
The Emerge can be connected to an OutLook multi-user switch in two different ways: either to a user
console or system port.
Connect to a switch console port
Emerge can be connected to one of the user console ports of the OutLook switch. Monitor installation
is optional if you want to perform setup or maintenance locally at the Emerge system.
Note
Console settings need to be at preemptive (rather than cooperative) at the KVM switch.
Connect to a system port
Emerge can be connected to one of the computer ports of the OutLook switch as if it were a
computer. All four (or two) console ports are available for users. This configuration does not require a
keyboard and mouse to be attached to the Emerge system. Onsite users can perform maintenance.