Filter
Top Products
Emerge Card Remote Access User Guide Installation •
••
• 16
To connect to a user pod and system pod
1 Make sure the Emerge system is turned off and unplugged.
2 Place the unit in the desired location, no longer than 12 feet from a user pod.
3 Connect the mouse, video, and keyboard interconnecting cables to their respective jacks on the
back panel of the EmergeCard.
4 Connect the other end of the mouse, video, and keyboard interconnecting cables to their
respective jacks on the user pod.
5 Connect the mouse, video, and keyboard cables of the system pod to their respective local KVM
jacks on the back panel of the Emerge.
6 Plug in your remote access connection to the modem or network connection port.
7 Plug the power cord into its socket on the back panel of the Emerge system.