Filter
Top Products
Emerge Card Remote Access User Guide Installation •
••
• 12
To connect to an OutLook multi-user switch
1 Make sure the Emerge system is turned off and unplugged.
2 Place the unit in the desired location.
3 Connect the video, mouse, and keyboard interconnecting cables to their respective jacks on the
back panel of the EmergeCard.
4 Connect the other end of the mouse, monitor, and keyboard interconnecting cables to their
respective jacks in one of the console ports on the back panel of the OutLook switch.
5 Connect the local mouse and keyboard to the jacks marked with their respective symbols on the
back panel of the Emerge system.
6 Plug in your remote access connection to the modem or network connection port.
7 Plug the power cord into its socket on the back panel of the Emerge system.