Filter
Top Products
Checking for damage on your hard disk
You can test a hard disk for damage with the Drive Setup program, which is
on the Macintosh Performa CD: Performa Software, a CD that came with
your computer.
1 Start up your computer from the
Macintosh Performa CD: Performa Software.
See “Starting Up From the Macintosh Performa CD: Performa Software” earlier
in this section.
2Click the Drive Setup icon in the Launcher to open the Drive Setup program.
3 In the list of drives, click the disk you want to test.
4From the Functions menu, choose Test Disk.
5When a message tells you that the testing is complete, click Quit.
If the test reveals a problem, you may be able to correct it by using Disk First
Aid or another disk repair program (see the instructions in the next section)
or you may need to reinitialize the disk (see “Initializing a Hard Disk” later in
this chapter). Consult an Apple-authorized service provider for assistance if
necessary. If you had a hard disk from another manufacturer installed after
you bought your computer, use the software that came with the disk or contact
the disk vendor to get the latest version of software.
105
Troubleshooting