Filter
Top Products
Use the Spanning Tree Protocol Configuration screen to view information and configure spanning trees. The
information about current spanning trees displayed on the left side of the screen include the bridge ID, designated
root, root port, root port cost, hello time, maximum age and forward delay information. Use the right side of the screen
to enable or disable Global STP Status, change the bridge priority, bridge hello time, bridge maximum age and bridge
forward delay. The following example shows the Spanning Tree Protocol Configuration screen.
9.4.1 STP Port Configuration
Use this screen to change the priority and the path cost for specific ports. The priority default value is 128, and the
value range is 0–240 (in multiples of 16).
82 Asante IntraCore IC36240 User’s Manual