Filter
Top Products
18
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
3.9.1 Wiring Map for Serial Cable
The following table describes the serial cable wiring information.
Switch’s 9-Pin Serial Port Null Modem PC’s 9-Pin DTE Port
2 RXD (receive data) ! 3 TXD (transmit data)
3 TXD " 2 RXD (receive data)
5 SGND (signal ground) --- 5 SGND (signal ground)
The serial port configuration requirements are as follows:
• Default Baud rate—9,600 bps
• Character Size—8 Characters
• Parity—None
• Stop bit—One
• Data bits—8