Filter
Top Products
40
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
There are four commands on this menu. The example below is from the GUI interface.
Map: Main Menu->Basic Configuration Menu->SNTP Configuration
Set SNTP Server IP Use to set Simple Network Time Protocol, enter SNTP server IP to get into it
Set SNTP Interval Use to set up SNTP polling interval, for example 1min
Set Time Zone Use to set the time zone Pacific
Set Daylight Saving Use to set up the daylight saving
6.2.8 ARP Table
Use this sub command to set the Address Resolution Protocol (ARP) table timeout, add or modify a static entry and
establish the sorting method.