Filter
Top Products
45
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
• Set GVRP Status
• Quit to previous menu
Set Port VID: Set PVID of a port.
Set Frame Type:
Set the acceptable frame types, All or Tagged Only. When the Tagged Only is selected,
all non-tagged packet are dropped.
Set GVRP Status: Enable or disable the GVRP of a port.
Note: When you delete an existing PVID the switch uses the default PVID1.
6.3.2 Link Aggregation
The Trunk Configuration screen is used to set multiple links between switches to work as one virtual link (aggregate
link). Trunk can only be defined for similar port types. For example, a 10/100 port cannot form a Port Trunk with a
gigabit port. For 10/100 ports, Trunk can only be formed within the same bank. A bank is a set of eight ports. Up to
four Trunk can be operating at the same time. Toggle the ports to the correct Trunk number to set up a Trunk. Click
Apply to enable the Trunk. Spanning Tree treats the Trunk ports as a single virtual port.
The Port Link Aggregation feature allows multiple links between switches to work as one virtual link or aggregate link.
Link Aggregation is only defined for similar port types. For example, a 10/100 port cannot form a Port Link
Aggregation with a gigabit port. Spanning Tree treats Link Aggregation ports as a single virtual port.
Map: Main Menu->Advanced Switch Configuration->Link Aggregation
There are seven options available from the Link Aggregation submenu.
• Set System Priority
• Add a Group Member
• Delete a Group Member
• Modify a Group Mode
• Set Port Priority
• LACP Group Status