Filter
Top Products
6-326-32
6-326-32
6-32
Chapter 6: RAID configurationChapter 6: RAID configuration
Chapter 6: RAID configurationChapter 6: RAID configuration
Chapter 6: RAID configuration
6.3.16.3.1
6.3.16.3.1
6.3.1
Creating a RAID 0 set (Stripe)Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
To create a RAID 0 set:
1. From the utility main menu, select
1. Create RAID Volume1. Create RAID Volume
1. Create RAID Volume1. Create RAID Volume
1. Create RAID Volume,
then
press <Enter>. This screen appears.
2. Enter a name for the RAID 0 set, then press <Enter>.
3. Highlight
RAID LevelRAID Level
RAID LevelRAID Level
RAID Level, press the up/down arrow key to select
|
RAID 0 (Stripe)RAID 0 (Stripe)
RAID 0 (Stripe)RAID 0 (Stripe)
RAID 0 (Stripe), then press <Enter>.
4. Highlight the
Disks Disks
Disks Disks
Disks item, then press <Enter> to select the hard disk
drives you want to include in the RAID set. The
SELECT DISKSSELECT DISKS
SELECT DISKSSELECT DISKS
SELECT DISKS screen
appears.
5. Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[ SELECT DISKS ]
[
↑↑
↑↑
↑
↓↓
↓↓
↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
Port Drive Model Serial # Size Status
0 XXXXXX XXXXXX XX.XGB Non-RAID Disk
1 XXXXXX XXXXXX XX.XGB Non-RAID Disk
2 XXXXXX XXXXXX XX.XGB Non-RAID Disk
3 XXXXXX XXXXXX XX.XGB Non-RAID Disk
Select 2 to 4 disks to use in creating the volume.
[
↑↑
↑↑
↑
↓↓
↓↓
↓]-Select [ESC]-Exit [ENTER]-Select Menu