Filter
Top Products
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-242-24
2-242-24
2-24
2.8.52.8.5
2.8.52.8.5
2.8.5
Optical driveOptical drive
Optical driveOptical drive
Optical drive
To uninstall the slim optical drive:
1. Use a Phillips screwdriver (cross)
to remove the screw on each end
of the top cover.
3. Firmly hold the cover and slide it
toward the rear panel for about
half an inch until it is disengaged
from the chassis.
2. Loosen the two thunbscrews on
the rear panel to release the top
cover from the chassis.
4. Released a drive tray by pushing
the spring lock to the right. Then
, firmly hold the tray level and
pull all the drive trays out of the
bay.