Filter
Top Products
ASUS RS120-E3/PA4ASUS RS120-E3/PA4
ASUS RS120-E3/PA4ASUS RS120-E3/PA4
ASUS RS120-E3/PA4
4-54-5
4-54-5
4-5
2.2.
2.2.
2.
USB device wake-up (3-pin USBPW12, USBPW34)USB device wake-up (3-pin USBPW12, USBPW34)
USB device wake-up (3-pin USBPW12, USBPW34)USB device wake-up (3-pin USBPW12, USBPW34)
USB device wake-up (3-pin USBPW12, USBPW34)
Set these jumpers to +5V to wake up the computer from S1 sleep mode
(CPU stopped, DRAM refreshed, system running in low power mode)
using the connected USB devices. Set to +5VSB to wake up from S3 and
S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply
in reduced power mode).
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise, the
system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
3.3.
3.3.
3.
Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you
press a key on the keyboard (the default is the Space Bar). This feature
requires an ATX power supply that can supply at least 1A on the +5VSB
lead, and a corresponding setting in the BIOS.
(Default)
+5V +5VSB
2
1
2
3
(Default)
+5V +5VSB
2
1
2
3
P5MT-R
®
P5MT-R USB device wake-up
USBPW12
USBPW34
(Default)
+5V +5VSB
2
1
2
3
P5MT-R
®
P5MT-R Keyboard power setting
KBPWR1