Filter
Top Products
5-205-20
5-205-20
5-20
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setup
5.4.25.4.2
5.4.25.4.2
5.4.2
Remote Access ConfigurationRemote Access Configuration
Remote Access ConfigurationRemote Access Configuration
Remote Access Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Select Remote Access
type.
Configure Remote Access type and parameters
Remote Access [Disabled]
Serial port number [COM1]
Base Address, IRQ [3F8h, 4]
Serial Port Mode [115200 8,n,1]
Flow Control [None]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
VT-UTFB Combo Key Support [Enabled]
Sredir Memory Display Delay [No Delay]
Remote Access [Disabled]Remote Access [Disabled]
Remote Access [Disabled]Remote Access [Disabled]
Remote Access [Disabled]
Allows you to enable or disable remote access. Configuration options:
[Disabled] [Enabled]
When the
Remote AccessRemote Access
Remote AccessRemote Access
Remote Access item is set to [Disabled], all other items do
not appear.
Serial port number [COM1]Serial port number [COM1]
Serial port number [COM1]Serial port number [COM1]
Serial port number [COM1]
Enables or disables the remote access feature. Configuration options:
[Disabled] [Enabled]
Serial Port Mode [115200 8,n,1]Serial Port Mode [115200 8,n,1]
Serial Port Mode [115200 8,n,1]Serial Port Mode [115200 8,n,1]
Serial Port Mode [115200 8,n,1]
Sets the Serial port mode. Configuration options: [115200 8,n,1] [57600
8,n,1] [38400 8,n,1] [19200 8,n,1] [09600 8,n,1]
Flow Control [None]Flow Control [None]
Flow Control [None]Flow Control [None]
Flow Control [None]
Allows you to select the flow control for console redirection. Configuration
options: [None] [Hardware] [Software]
Redirection After BIOS POST [Always]Redirection After BIOS POST [Always]
Redirection After BIOS POST [Always]Redirection After BIOS POST [Always]
Redirection After BIOS POST [Always]
Sets the redirection mode after the BIOS Power-On Self-Test (POST). Some
operating systems may not work when this item is set to Always. Configuration
options: [Disabled] [Boot Loader] [Always]
Terminal Type [ANSI]Terminal Type [ANSI]
Terminal Type [ANSI]Terminal Type [ANSI]
Terminal Type [ANSI]
Allows you to select the target terminal type. Configuration options: [ANSI]
[VT100] [VT-UTF8]