Filter
Top Products
5-34 Chapter 4: BIOS setup
Serial port number [COM1]
Allows you to select serial port for console redirection.
Configuration options: [COM1] [COM2]
Baudrate [19200]
Sets the Serial port settings.
Configuration options: [115200] [57600] [38400] [19200] [9600]
Flow Control [None]
Allows you to select the flow control for console redirection.
Configuration options: [None] [Hardware] [Software]
Redirection After BIOS POST [Always]
Sets the redirection mode after the BIOS Power-On Self-Test (POST). Some
operating systems may not work when this item is set to Always.
Configuration options: [Disabled] [Boot Loader] [Always]
Terminal Type [ANSI]
Allows you to select the target terminal type.
Configuration options: [ANSI] [VT100] [VT-UTF8]
VT-UTF8 Combo Key Support [Disabled]
Enables or disables the VT-UTF8 combo key support for ANSI or VT100 terminals.
Configuration options: [Disabled] [Enabled]
Media Type [Serial]
Selects the media for console redirection. Configuration options: [Serial]
[LAN] [Serial + LAN]