Filter
Top Products
2-35ASUS TS300-E3/PA4 & PS4
2.10.3 SATA/SCSI backplane
To remove the SATA/SCSI backplane:
1. Remove the HDD blower case.
Refer to section “2.10.2 HDD
blowers” for instructions.
2. Disconnect all cables from the
SATA/SCSI backplane.
When disconnecting a cable,
hold and firmly pull the cable
plug. DO NOT pull the cable
itself. Doing so may damage the
cable!
3. From the inner edge, push the
backplane outward so that the outer
edge protrudes slightly from the
slot.
4. From the outer edge, firmly hold the
backplane and carefully slide it out.