Filter
Top Products
4-7ASUS TS300-E3/PA4 & PS4
4. Keyboard/Mouse power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard/mouse wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when
you press any key on the keyboard (the default is the Space Bar) or click the
mouse. This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
5. VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard ATI
®
RAGE-XL
PCI VGA controller. Set to pins 1-2 to activate the VGA feature.
LAN2
®
P5MT Series Keyboard power setting
KBPWR1
(Default)
+5V +5VSB
2 3
1 2
LAN2
®
P5MT Series VGA setting
VGA_EN1
Enable
(Default)
Disable
2
1
2
3