Filter
Top Products
2-29ASUS TS300-E3/PA4 & PS4
Refer to the following tables for the jumper settings and the appropriate ID# for
each SCSI HDD bay.
SCSI backplane jumper settings and HDD ID assignments
The 6-pin jumper J1 on each of the SCSI backplanes allows you to define your
desired SCSI configuration.
The picture below shows the location of jumper J1 with pins 1-3 and 2-4 shorted.
J1 setting
(1-3 shorted, 2-4 shorted)
Device SCSI ID#
Drive Bay 1 ID0
Drive Bay 2 ID1
Drive Bay 3 ID2
Drive Bay 4 ID3
GEM SAF-TE ID15 (SCSI channel-0)