Filter
Top Products
2-21ASUS TS300-E3/PA4 & PS4
2.8 Expansion cards
Refer to this section when installing expansion cards.
2.8.1 Installing an expansion card
To install an expansion card:
1. Lay the chassis on its side.
2. Locate the metal bracket opposite
the slot you want to use.
Remove the screw that secures the
metal bracket to the chassis. Set
aside the metal bracket for future
use.
3. Align the card golden fingers to the
slot and its metal bracket to the slot
opening on the chassis.
4. Press the card firmly until it is
properly seated on the slot.
5. Secure the card to the chassis with
the bracket screw you removed
earlier.
Make sure to unplug the power cord before installing or removing expansion
cards. Failure to do so may cause physical injury, and damage to the card and
motheboard components!