Filter
Top Products
Chapter 4: Motherboard information4-8
6. Gigabit LAN controller setting (3-pin LAN_EN1, LAN_EN2)
These jumpers allow you to enable or disable the onboard Broadcom
®
BCM5721 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate the
Gigabit LAN controller.
LAN2
®
P5MT Series LAN_EN1 setting
Enable
(Default)
Disable
LAN_EN1
2
1
2
3
LAN2
®
P5MT Series LAN_EN2 setting
Enable
(Default)
Disable
LAN_EN2
2
1
2
3
7. RAID controller selection (3-pin RAID_SEL1)
[P5MT model only]
This jumper allows you to select the RAID configuration utility to use when you
create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI
Logic Embedded SATA RAID Setup Utility (default); otherwise, place the
jumper caps to pins 2-3 to use the Intel
®
Matrix Storage Manager.
LAN2
®
RAID_SEL1
LSI RAID ROM
(Default)
INTEL RAID ROM
2
1
2
3
P5MT Series RAID_SEL1 setting