Filter
Top Products
10
Secure data through Write Protection
For added security, write protection can be
enabled for any tape cartridge with a VTL. When
write protection is enabled, existing data on the
tape cartridge cannot be overwritten or erased.
The displayed data can be sorted by any field by
clicking on the heading for the field; clicking
twice reverses the sort order.
1 If you are not already in the FastStream GUI,
type the IP address of your appliance, as found
in Use the FastStream VT 5300 GUI
on page
23, in a standard browser, click Enter Here and
type in your username and password.
2The Monitor VTL page appears. On the menu
at the left hand side of the page, choose
Manage.
3The Manage VTL page appears. Choose the
Virtual Tape Libraries arrow.
4 Click in the Enable/Disable Write Protection
button.
5 Click on Next.
6 Click on the tab with the name of the VTL for
which you wish to change write protection.
7 Click in the radio box to change the write
protection level for that VTL.
8 Click Commit.
9 A warning box appears. If you wish to proceed,
click on Yes. Clicking on No ends the
procedure without making a change.
10 The Enable/Disable Write Protection page
appears.
11 If you wish to protect elements in another
library, select the library and repeat this
procedure.
Move Virtual Tape Cartridges
The
Move Medium
page is an interface which
simulates a generic library front panel operation.
1 If you are not already in the FastStream GUI,
type the IP address of your appliance, as found
in Use the FastStream VT 5300 GUI
on page
23, in a standard browser, click Enter Here and
type in your username and password.
2The Monitor VTL page appears. On the menu
at the left hand side of the page,
choose Manage.
3The Manage VTL page appears.
Choose the Virtual Tape
Libraries arrow.
4 Click in the Move Medium
button.
5 Click on Next.
6 Click on the tab with the name of
the VTL for which you wish to
move medium.
7 Click on the radio button next to
the Virtual Tape Cartridge
element you wish to move.
8 Click on the radio button next to the new place
where you want the Virtual Tape Cartridge
element.
9 Click Commit.
10 The Monitor VTL page appears.
11 If you wish to move other VTL cartridges
elements, repeat this procedure.