Filter
Top Products
22
Use FTP over Ethernet
1 Establish an FTP link to the ATTO FastStream
VT 5300 that is to be flashed.
2Use the PUT command to download the
firmware. For example
PUT c:\firmware\FS5300100.IMA
3 Once the download is complete, cycle power on
the ATTO FastStream VT 5300 to implement
the new firmware.
Use the RS-232 serial link
1 Load a Terminal Program such as Hyper
Terminal.
2 Set the terminal and the ATTO FastStream VT
5300 for the highest possible baud rate for your
terminal.
3 Turn on power to the ATTO FastStream VT
5300.
4 Once the Ready prompt appears, type
ZMODEM RECEIVE. The ATTO FastStream
VT 5300 displays that it is preparing to receive
a file from your terminal program.
5 On the terminal program, choose Transfer
Send File
6 In the Send File box, type in the current ATTO
FastStream VT 5300 .ima file or click the
browse button to find it
7 Click Send File
8 The ATTO FastStream VT 5300 should
acknowledge receiving the file and display a
message not to interrupt power for 90 seconds.
9 Once the download is complete, cycle power on
the ATTO FastStream VT 5300 to invoke the
new firmware.