Avery 204 Label Maker User Manual


 
29
CONTENTS
3.1 ELECTRICAL CONNECTIONS
ALS
20x
256
GB
3.1.1 Power supply connection
WARNING!
This machine operates using mains voltage!
Touching live electrical parts may expose
you to hazardous electrical currents and
may lead to burns.
£ Make sure that the device is switched off
before you connect the power cable.
£ (ALS20X)Only operate the device with
the mains voltage set on the voltage
selector switch.
£ (ALS20X) Ensure that the unit is set to
receive the mains voltage supplied by
your electricity provider.
£ (ALS256) Only operate the device using
the system voltage indicated on the
nameplate.
£ Only connect the unit to a grounded
power socket fitted to authorised
standards.
£ The power cable should not be more than
3 m long.
The device is only completely disconnected
from the mains if the power cable is
unplugged. Therefore:
£ Make sure the power supply socket is
accessible.
£ In case of emergency, switch off the
device and disconnect the power cable!
[26] Power supply (A) on the ALS 20X
A
3 BEFORE OPERATION
3.1 ELECTRICAL CONNECTIONS