Filter
Top Products
26 AutoView 3050/3100/3200 Switch Installer/User Guide
To set the keyboard country code for Sun servers:
1. If the OSCAR interface is not open, press
Print Screen to open the Main dialog box.
2. Click
Setup - Keyboard to open the Keyboard dialog box shown in Figure 3.9.
Figure 3.9: OSCAR Interface Keyboard Dialog Box
3. Select a country code and click OK to save your settings.
4. Reboot the Sun servers. After rebooting, each Sun server will request the country code setting
stor
ed in the IQ module.
NOTE: If you wish to reboot the target devices by power-cycling them, you must wait 90 seconds before
rebooting. A soft reboot may be performed without waiting 90 seconds.
Configuring network settings
Use the Network dialog box to set the IP address, select an Ethernet mode or enable or disable the
Ping Response feature.
NOTE: Only appliance administrators can make changes to Network dialog box settings. Other users can still
access this dialog box, as well as the IP Setup dialog box, to view information, but they will not be able to make
any changes.
To set the Ethernet Mode:
1. If the OSCAR interface is not open, press
Print Screen to open the Main dialog box.
2. Click
Setup - Network to open the Network dialog box shown in Figure 3.10.