Avocent 3200 Switch User Manual


 
84 AutoView 3050/3100/3200 Switch Installer/User Guide
Type 10/100/1000 Ethernet
Connector 8-pin modular
Local Port
Number 1
Type PS/2, USB and VGA
USB Device Port
Number 4
Type USB 1.1
Power Supply
Type Internal
Power
AutoView 3100: 11.0 W
AutoView 3200: 13.0 W
Heat Dissipation
AutoView 3100: 37.5 BTU/hr
AutoView 3200: 44.4 BTU/hr
AC-input Range 100 - 240 VAC
AC Frequency 50 - 60 Hz autosensing
AC-input Current Rating 0.5 A
AC-input Power (maximum)
For Autoview 3100/3200 switches: 40 W
For AutoView 3050 switch: 25W
AC-input Cable
18 AWG three-wire cable, with a three-lead
I
EC-320; receptacle on the power
supply end and a country-dependent plug on the power resource end
Ambient Atmospheric Condition Ratings
Temperature
32 to 104 degrees Fahrenheit (0 to 40 degrees Celsius) operating;
-4 to 158 degrees Fahrenheit (-20 to 70 degrees Celsius) nonopera
t
ing
Humidity 10 - 95% noncondensing
Safety and EMC Standards
Appro
vals and Markings
UL, FCC, cUL, ICES-003, CE, GS, VCCI, MIC, C-Tick, GOST
Safety certifications and EMC certifications f
or this product are obtained under
one or more of the following designations: CMN (Certification Model Number),
MPN (Manufacturer’s Part Number) or Sales Level Model designation. The
designation that is referenced in the EMC and/or safety reports and certificates
are printed on the label applied to this product.
Table D.1: AutoView 3050/3100/3200 Switch Product Specifications (Continued)