Filter
Top Products
32 Avocent Emerge ECMS2000U Extender Installer/User Guide
5. Choose Firmware Management. The Firmware Management Menu will appear.
Figure 3.21: Receiver Firmware Management Menu
6. Choose Receiver Flash Upgrade Via HTTP. You will be prompted to enter the URL for the
upgrade file.
7. Enter the URL for the upgrade file using the following syntax:
http://<server ip address>[:server port]/<upgrade file path>
For example:
http://192.168.0.1:8080/RX.dld
NOTE: If the server is set up on standard port 80, the port information can be omitted.
8. To initiate the file transfer press Enter. The connection to the Transmitter will be dropped.
9. When the transfer has completed, a message will display stating “Firmware update successful.
Resetting Appliance...”
10. The connection to the Transmitter will be restored.
NOTE: If the Receiver determines that the upgrade file is invalid, the Receiver cancels the upgrade and
maintains the previous firmware version. A message will display indicating that the firmware upgrade has failed.